Explain about Local Area Network (LAN).

Explain about Local Area Network (LAN).

Local Area Networks:

Local area networks, generally called LANs, are privately-owned networks within a

single building or campus of up to a few kilometres in size. They are widely used to connect

personal computers and workstations in company offices and factories to share resources

(e.g., printers) and exchange information. LANs are distinguished from other kinds of

networks by three characteristics: 

(1) Their size, 

(2) Their transmission technology, and 

(3) Their topology. 

LANs are restricted in size, which means that the worst-case transmission time is bounded and known in advance. Knowing this bound makes it possible to use certain kinds of

designs that would not otherwise be possible. It also simplifies network management. 

LANs may use a transmission technology consisting of a cable to which all the

machines are attached, like the telephone company party lines once used in rural areas.

Traditional LANs run at speeds of 10 Mbps to 100 Mbps, have low delay (microseconds or nanoseconds), and make very few errors. Newer LANs operate at up to 10 Gbps various topologies are possible for broadcast LANs. Figure1 shows two of them. In a bus (i.e., a linear cable) network, at any instant at most one machine is the master and is allowed to transmit. All other machines are required to refrain from sending. An arbitration mechanism is needed to resolve conflicts when two or more machines want to transmit simultaneously. The arbitration mechanism may be centralized or distributed. IEEE 802.3, popularly called Ethernet, for example, is a bus-based broadcast network with decentralized

control, usually operating at 10 Mbps to 10 Gbps. Computers on an Ethernet can transmit whenever they want to; if two or more packets collide, each computer just waits a random time and tries again later.

A second type of broadcast system is the ring. In a ring, each bit propagates around on its own, not waiting for the rest of the packet to which it belongs. Typically, each bit circumnavigates the entire ring in the time it takes to transmit a few bits, often before the complete packet has even been transmitted. As with all other broadcast systems, some rule is needed for arbitrating simultaneous accesses to the ring. Various methods, such as having the machines take turns, are in use. IEEE 802.5 (the IBM token ring), is a ring-based LAN operating at 4 and 16 Mbps. FDDI is another example of a ring network.